Vacuum Suction Pump Regassing Laminating Packaging Aircon Refill
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Vacuum Suction Pump Regassing Laminating Packaging Aircon Refill

  • Product SKU: SUCTION_PUMP
  • Category: REVIEWS
Image
  • Order within
Available: Out of Stock
$263.00 $302.45
Successful pre-order.Thanks for contacting us!

mini vacuum pump, FY - 1H - N vacuum suction air pump for lcd separation machine and oca lamination machine.

User Manual:

1. Use the vacuum at the pump, go down enter the angry plug at the beginning, join, release into the container, pass the pipeline should be short
2. Check the air inlet and urgent junction, release into the container and pass the reliable pipeline seal, there can be no infiltration phenomenon
3. Exhaustion plug when lowering and catching the collecting device, open the switch, the pump starts to work
4.Pump after use, close the pump and valve to smoke the container
5. Turn off the pump switch, remove the plug
6. Remove and join the pipeline
7. Cover and enter the angry plug and exhaust tightly on the cap - shaped cover at last, prevent the booty or particles float from entering the pump.

Notes:
1. Check if the interface places the pipe whorl and the air inlet whorl are the same
2.The pump should pay attention to the oil level change when using, when the oil level dropped to the single track oil level line under 5MM or dual line location line lower limit in the oil window, please add the vacuum pump oil in time

Workplan:
1. Check whether the power used complies with the supply voltage and the marking frequency on the nameplate of the products.
2.Please ensure that the pump is in front of power on that the switch is in the closed state
3. The pump oil is annotated
Notes:
1. The pace can not be too fast to refuel, prevent the pump oil from overflowing

Technical Parameter:
Specified voltage: 220 V - / 50Hz
Smoke angry speed: 3.6 m3 / h
Limit pressure: 2 Pa
The power of electric machines: 150 W
The air inlet joins the whorl: 1/4 "rocket
Fuel quantity: 150 ml
External dimension: 255X105X202
Weight: 4 kg

Inner packing:
Vacuum air pump (as the picture) x1set


13SLB

mini vacuum pump, FY - 1H - N vacuum suction air pump for lcd separation machine and oca lamination machine.

User Manual:

1. Use the vacuum at the pump, go down enter the angry plug at the beginning, join, release into the container, pass the pipeline should be short
2. Check the air inlet and urgent junction, release into the container and pass the reliable pipeline seal, there can be no infiltration phenomenon
3. Exhaustion plug when lowering and catching the collecting device, open the switch, the pump starts to work
4.Pump after use, close the pump and valve to smoke the container
5. Turn off the pump switch, remove the plug
6. Remove and join the pipeline
7. Cover and enter the angry plug and exhaust tightly on the cap - shaped cover at last, prevent the booty or particles float from entering the pump.

Notes:
1. Check if the interface places the pipe whorl and the air inlet whorl are the same
2.The pump should pay attention to the oil level change when using, when the oil level dropped to the single track oil level line under 5MM or dual line location line lower limit in the oil window, please add the vacuum pump oil in time

Workplan:
1. Check whether the power used complies with the supply voltage and the marking frequency on the nameplate of the products.
2.Please ensure that the pump is in front of power on that the switch is in the closed state
3. The pump oil is annotated
Notes:
1. The pace can not be too fast to refuel, prevent the pump oil from overflowing

Technical Parameter:
Specified voltage: 220 V - / 50Hz
Smoke angry speed: 3.6 m3 / h
Limit pressure: 2 Pa
The power of electric machines: 150 W
The air inlet joins the whorl: 1/4 "rocket
Fuel quantity: 150 ml
External dimension: 255X105X202
Weight: 4 kg

Inner packing:
Vacuum air pump (as the picture) x1set


13SLB

RETURNS POLICY

Returns
The shopsite's return policy lasts for 14 days. If 14 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange, unless otherwise stated in law.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging(if any).
Several types of goods are exempt from being returned, like health & beauty products, perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Customer will responsible for return and will pay for return shipping cost.

Note: We do not accept the change of mind return or refund, Please choose the product carefully.

Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at orders@theshopsite.co.nz for assistance.

Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your card or original method of payment, within a certain amount of days.

Refund will be only offered if we are not able to fix the issue or if we can not offer a replacement.

SHIPPING

Most of the order dispatched within 24 hours until/unless specific instruction has been stated on the listings.

We use different shipping carriers depend on the item size, smaller to medium size items gets delivered overnight. Big items gets delivered in 2 to 4 working days.

If you do not receive the item by the time frame please contact us and our customer service team will look into it for you.